Bodyfillers & Primers

Multi Putty 1K NC Multi Putty 200g multifunctional lightweight putty. 25% lighter than standard putties. Very easy application and easy sanding, with no sandpaper clogging. Working time: 3-5mins Drying time: 16-30min Sanding: P120-320

Easy Sand 2K Flowable Filler 1Litre. Finish Line Liquid Glaze is a flowable polyester filler putty for finishing, blending and skim coating bodywork, pinholes, grind marks, low spots, and other surface imperfections. This putty adheres well to steel, galvanized, other zinc coated steel, aluminium, and most rigid to semi-rigid fiberglass and thermo-set plastics. Has a higher resin content than traditional fillers which makes it less porous. This ensures lower moisture penetration and lower absorption of primer. Process time is therefore faster & a non-shrinkage finish is ensured. Drying time: 2.5-3h at 20 degrees Celsius Drying time: 15-20min at 60 degrees Celsius Film thickness: 40-180μm Normal coats: 1-2

Fibre DIY 2K Fibreglass Repair Kit 250g - Fast curing Polyester Repair Kit for the repair of rust holes and GRP components. Kit includes hardener and glass-fibre-mat. Quick-drying polyester resin filters the mat and glass cloth excellently. Easy application. Contains additives which cause the reduction of styrene emissions during and after application, as well as an additive which causes the hardened laminate not to have a sticky surface after drying, which is particularly important when machining with abrasive materials. Excellent adhesion to steel surfaces. For car body repairs, construction and home DIY.

Multi Putty Universal Plastic Putty 500g multifunctional lightweight putty. 25% lighter than standard putties. Very easy application and easy sanding, with no sandpaper clogging.

Multimaster Anticorrosive 1K Fast Dry Primer.

This Alu-Zinc-Spray provides a silver glossy coating with corrosion protection that can be used on all weldable surfaces or for line & spot welding to achieve perfect electricity conduction. With its excellent adhesion, it can also be used as a one-can system, both as primer & topcoat. It is over-paintable with most modern paints & coatings.

This product is a one-component polyurethane sealer that comes in a cartridge and has a thick consistency, dries rapidly, and hardens when exposed to humidity in the air. It can be applied using a manual or pneumatic applicator gun. The sealer takes around 12 minutes to cure at 23ºC/50% humidity and should be used within 5 minutes of opening the cartridge at the same temperature and humidity level.

Mono-component, liable polyurethane seam sealer, strong bond and polymerizes with air humidity. Ideal for sealing, filling and bonding body parts. Repaintable and sandable.

Mono-component, liable polyurethane seam sealer, strong bond and polymerizes with air humidity. Ideal for sealing, filling and bonding body parts. Repaintable and sandable.

Classic Stone Chip Protection - Based on rubber and resins, has both anti-corrosive and sound deadening qualities. Fully over-paintable. Available in White, Grey and Black. Drying time: 30-60min at 20 Degrees Celsius.

Classic Stone Chip Protection - Based on rubber and resins, has both anti-corrosive and sound deadening qualities. Fully over-paintable. Available in White, Grey and Black. Drying time: 30-60min at 20 Degrees Celsius.

Classic Stone Chip Protection - Based on rubber and resins, has both anti-corrosive and sound deadening qualities. Fully over-paintable. Available in White, Grey and Black. Drying time: 30-60min at 20 Degrees Celsius.

Solvent based degreaser - For general surface preparation prior to painting.

Multimaster Basecoat Thinner - For metallic paint standard.

1K Etch Primer with Epoxy acrylic resins - Fast Drying filler for quick, small and medium repairs. Exceptional insulating and high anti-corrosive properties on new panels. Perfect Adhesion to steel, galvanized steel, aluminium, putties, old paints and plastics (except for PE and PP). 1K Epoxy 1000 creates an elastic, smooth and very easy to sand surface. Very high quality, quick and durable product for the body repair process with only 20 minutes air drying time needed before sanding.